Sorry, your browser does not support JavaScript!
1-1/4" x 1/64" x 18" Flat Ground Stock - Oil Hardening
  • DESCRIPTION

    Stock is dimensionally stable - use it for the most intricate work. Deep hardening characteristics and fine grain structure. Machines freely - fully spheroidized, annealed. Full length identification - eliminates confusion with other steels. Furnished in 18" length, ground straight and parallel. Nominal Analysis (AISI 01): Carbon-.90 Tungsten -.50, Chromium-.50 Vanadium-.20, Manganese-1.20. Hardening: It is recommended that stock be heated uniformly to 1450° - 1500°F and quenched in oil. Temperature of the quenching oil should be 120° - 140°F for best results. Do not quench in water because this is an oil hardening steel. Tempering: For maximum toughness, a tempering time of one hour at temperature is recommended. Use chart for selecting desired Rockwell C hardness and corresponding tempering temperature. The following table may also be used as a guide depending on type of work. Cutting Tools - 300° - 350°F (Light Straw), Solid Punches and Dies - 400° - 450°F (Straw), Spring Temper - 750° - 800°F (Blue)
warningThis product may contain metals and/or chemicals that are included in the State of California's latest Prop 65 warnings. Exposure may cause cancer and/or reproductive harm. For more information go to www.P65Warnings.ca.gov
1-1/4" x 1/64" x 18" Flat Ground Stock - Oil Hardening
Order No. 53927

Our Price: $104.24

ADD TO CART
Thickness:
1/64"
Weight:
6 lbs.
Width:
1-1/4"
Length:
18"
Temperature Range:
1450° - 1500°
Finish/Coating:
35 microinch or finer
Tolerance Thickness
±.001"
Tolerance Width
+.000/.005"
Tolerance Square
±.001"
Tolerance Length
1/4"
Squareness Edge
.003 per inch
Quench
Oil
Hardness Rockwell C
63-65
Brand:
ENGLAND